Sb-filters Cold Air Intake Kit - Cotton Filter 75-5059 User Manual download pdf

1. With the ignition switched off and the

parking brake set, disconnect the negative

battery cable on the passenger’s side.

Installation Instructions

Vehicle Application

Year: 2009-13

Make: Chevy/ GMC/ Cadillac

Model: Silverado/ Sierra 1500, Tahoe/

Yukon, Suburban/ Yukon XL, Escalade ESV/

EXT, Yukon Denali/ XL, Avalanche

Engine: 4.8L, 5.3L, 6.0L, 6.2L V8

15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 - www.sbﬁlters.com

6. Disconnect the intake tube from the

throttle body.

9. Remove the air cleaner box from the

vehicle by carefully pulling it up out of the

factory grommets.

7. Disconnect the intake tube from the air

cleaner assembly. Then remove the intake

from the vehicle.

2. Remove the engine cover by lifting it up

out of the grommets, then pull towards the

front of the vehicle.

8. Using a ﬂat blade screwdriver, remove the

intake tube from the push pin located on the

coolant tube. Then remove the intake from

the vehicle.

P/N: 75-5059 / 75-5059D

SEE EXPLODED VIEW ON PAGE 4

Tools Required

•

Ratchet and extensions

•

10mm Socket and Wrench

•

3/16” Allen Wrench

•

5/16” Nut Driver or Flat Blade Screwdriver

•

Phillips Screwdriver

•

9/16” Wrench

Notes

Kit may not ﬁt with the following

Aftermarket Parts installed:

•

Body Lift or Lowering Kit

•

Custom Hood

•

Throttle body upgrades

S&B Filter Maintenance

Cleanable (KF-1055). If the enclosed ﬁlter is Red, it came pre-oiled

from the factory. When serviced, apply (90g) of S&B oil to the main

body of the ﬁlter.

Disposable (KF-1055D). If the enclosed ﬁlter is White, it is a

disposable ﬁlter and should be discarded once it reaches capacity.

This ﬁlter (does not require oil). For more info on S&Bʼs disposable

ﬁlter, visit www.sbﬁlters.com.

3. Disconnect the crank case vent line from

the intake tube plenum by gently pulling it out.

5. Disconnect the MAF sensor wiring

harness from the MAF sensor. Note: If

equipped, disconnect the Pressure Sensor

wiring harness (located on the air cleaner lid)

at this time as well.

4. Disconnect the other end of the crank

case vent line from the vehicle by sliding the

locking tab over and pull away from the valve

cover port.

Before You Start

•

Please read the entire product guide before proceeding.

•

Ensure all components listed on page 4 are present.

•

If you are missing any of the components, call our customer

support at (909) 947-0015.

•

Do not work on your vehicle while engine is hot.

•

Make sure the engine is turned off and the vehicle is in Park or

the Parking Brake is set.

CARB Status - Exempt

CARB EO #: D-590-8

Legal for use in CA or other states

adopting CA emissions standards

See Page 3 for more info.

1 2 3 4

Summary of Contents

Page 1 - P/N: 75-5059 / 75-5059D

1. With the ignition switched off and the parking brake set, disconnect the negative battery cable on the passenger’s side.Installation InstructionsV

Page 2

15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 - www.sbﬁlters.comInstallation Instructions (continued)14. If equi

Page 3

15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 - www.sbﬁlters.comInstallation Instructions (continued)3P/N: 75-50

Page 4 - Exploded View

ITEMQTY.DESCRIPTIONP/NA1Air Inlet PlugAI1559-00B1Air BoxAL1157-00C1Air Inlet Fender SealAI1550-00D1S&B Air FilterKF-1055E1Hose Clamp, #80AG1010-00

Comments to this Manuals

No comments

Sb-filters Cold Air Intake Kit - Cotton Filter 75-5059 User Manual

Browse online or download User Manual for Accessories for air Sb-filters Cold Air Intake Kit - Cotton Filter 75-5059. S&B Filters Cold Air Intake Kit - Cotton Filter 75-5059 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for air Sb-filters Cold Air Intake Kit - Cotton Filter 75-5059