Sb-filters Cold Air Intake Kit - Cotton Filter 75-2514-4 User Manual download pdf

3/17/2009

REV-D

(909) 947

-0015 PHONE • (909) 947-0603 FAX

www.sbfilters.com

INSTALLATION INSTRUCTIONS

(OVER)

S&B Part # 75-2514-4

FORD

F-Series V8-4.6L, 5.4L

(Except Super Duty)

Expedition V8-436L, 5.4L

Navigator V8-5.4L SOHC

* Kit may not fit vehicles with a body

lift installed.

QTY PARTS LIST QTY PARTS LIST

1 3” / 3.5”Step Adapter 1 3/4” x 6” Hose

1 3.5”/ 4” Step Adapter 2 1/4”-20 Speed Nut

1 Intake Tube 2 1/4”-20 x 3/4” Bolt

1 Air Filter Shield 2 1/4” Fender Washer

1 Air Filter 2 Gasket

1 1/2” Grommet 1 Filter Adapter

2 #64 Hose Clamp 4 1/4-20 x 1” Bolt

2 #60 Hose Clamp 4 1/4 Washer

3 #8 Hose Clamp

TOOLS REQUIRED

Screw Driver (flat)

7/16” Socket

10mm Socket

Socket Extension

(Long)

Ratchet

13mm Wrench

1. With the engine turned off, disconnect the

vehicle’s negative battery cable. Loosen the 3

bolts that secure the throttle body dust cover.

3. Disconnect the electrical connection

for the air temperature sensor.

2. Remove the dust cover.

4. (a) On 4.6L Engines: Disconnect both the

air bypass valve line and the crankcase vent

line from the OE air intake tube.

4. (b) On 5.4L Engines: Disconnect both the

idle air control line and the crankcase vent

line from the OE air intake tube.

5. At the throttle body, loosen the hose clamp

on the OE air tube.

7. Pull up to release the OE air intake tube

assembly from the grommets. And remove it

from the vehicle.

6. Disconnect the electrical connection for

the MAF sensor.

8. Unclamp and open the air cleaner to gain

access to the MAF housing.

9. Use a flat head screw driver to pry up the

rubber grommet, turn it side ways and push it

back through the hole.

10. Release the four clips that secure the MAF

sensor housing by pushing with a flat blade

screwdriver. Remove the housing and set the

wiring harness aside for now.

11. Remove the 4 bolts to separate the MAF

from the housing.

12. Assemble the MAF sensor, heat shield

and the filter adapter using the two gaskets

and 1/4-20 x 1” bolts provided.

5.4L Engine shown.

1 2 3

(continued) 2

Summary of Contents

Page 1

3/17/2009 REV-D (909) 947-0015 PHONE • (909) 947-0603 FAX www.sbfilters.com INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS (OVER) S&

Page 2 - (continued)

3/17/2009 REV-D (909) 947-0015 Phone • (909) 947-0603 Fax www.sbfilters.com INSTALLATION INSTRUCTIONS (continued) 13. Twist and pull to remove

Page 3

3/17/2009 REV-D PERFORMANCE TESTING ∗ Engage parking brake and start your engine. Listen for abnormal noises. If an air leak is detected, re-inspec

Comments to this Manuals

No comments

Sb-filters Cold Air Intake Kit - Cotton Filter 75-2514-4 User Manual

Browse online or download User Manual for Accessories for air Sb-filters Cold Air Intake Kit - Cotton Filter 75-2514-4. S&amp;B Filters Cold Air Intake Kit - Cotton Filter 75-2514-4 User Manual [it]

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for air Sb-filters Cold Air Intake Kit - Cotton Filter 75-2514-4

Browse online or download User Manual for Accessories for air Sb-filters Cold Air Intake Kit - Cotton Filter 75-2514-4. S&B Filters Cold Air Intake Kit - Cotton Filter 75-2514-4 User Manual [it]